Low Water Pressure at Home: Common Causes and What You Can Do

Last updated:

You turn on the shower and get a trickle. The kitchen tap takes forever to fill a kettle, and the washing machine seems to run all morning. Low water pressure is one of the most common complaints we hear from homeowners, and it is rarely random. The cause is usually something specific, and often something simple to fix. This guide walks through the likely culprits, starting with the easiest checks.

First, work out how widespread the problem is

Where the pressure is low tells you a lot about why.

  • Every tap in the house is weak. The problem is probably with the supply to your property, the main valve, the pressure valve on your geyser system, or a leak on the main line.
  • Only hot water is weak. Look at the geyser, its isolating valve and the hot water pipes.
  • Only one tap or shower is weak. This is usually a blocked aerator or shower head, or a partly closed isolating valve at that fitting.
  • Pressure drops at certain times of day. Municipal demand is probably the cause, for example in the early morning and evening when many households use water at once.

Ask a neighbour whether they have the same problem. If they do, the issue is likely in the municipal supply, and you should report it to your municipality.

Common causes and fixes

Blocked aerators and shower heads

Minerals in the water build up in the small holes of tap aerators and shower heads. Unscrew the fitting, soak it in white vinegar for an hour or two, brush it clean and refit it. This simple job fixes a large share of single-tap complaints.

A partly closed valve

Check the main shut-off valve at your meter or boundary and the isolating valves near the geyser and under basins. A valve that was only partly reopened after earlier plumbing work will restrict flow. Open it fully, but gently, because old valves can seize or break.

Hidden leaks

A leak on the supply line sends water into the ground instead of your taps. If your water bill has climbed or you notice damp patches or soggy ground, read our post on finding hidden leaks and do the meter test.

Corroded or clogged pipes

Older galvanised steel pipes rust from the inside, and the buildup narrows the pipe until little water gets through. If your home has old pipework and the pressure has dropped gradually over the years, the pipes may need replacing. A plumber can confirm this and recommend which sections to renew.

Geyser and pressure control valves

Hot water pressure problems can come from a blocked outlet, a faulty valve or a sediment-filled geyser. Our post on geyser care and maintenance covers what to check. Do not adjust or remove pressure valves yourself. They are safety devices, and the geyser must not be bypassed.

Pressure reducing valves

Some homes have a pressure reducing valve that lowers the incoming pressure to protect the plumbing. If it fails or is set too low, the whole house suffers. A plumber can test and adjust or replace it.

Too many outlets at once, or undersized pipes

If pressure falls only when several taps, a washing machine and a garden hose run together, the pipework may simply be too small for the demand. Extensions to a house are a common reason. A plumber can advise on upgrading the main feed.

Options when the municipal supply is the problem

If low pressure comes from the supply itself, there are a few things homeowners commonly consider:

  • A storage tank with a booster pump can give steady pressure and a reserve during outages. It must be installed properly, with the right fittings and, where required, backflow protection.
  • A pressure pump on a tank is a more modest option for a single problem area, such as an upstairs bathroom.

Pumps connected directly to the municipal main are generally not allowed, so get advice before buying. Pumps also need a safe electrical supply with earth leakage protection, which is where having both a plumber and an electrician involved helps.

When to call a plumber

Call a professional if:

  • Pressure has dropped suddenly in the whole house
  • You suspect a leak you cannot find
  • Pipes are old, rusty or discoloured water comes from the taps
  • You hear banging or hammering in the pipes
  • The geyser or its valves are involved

Frequently asked questions

Is it okay to just fit a bigger shower head?

A different shower head will not create pressure that is not there. If supply is the problem, you need to fix the supply or add a pump.

Why is my pressure worse in the morning?

Many households use water at the same time, and municipal pressure drops during these peaks. A storage tank and pump can smooth this out.

Can a pump damage my pipes?

A correctly sized pump on a tank is fine. An oversized pump or incorrect installation can stress old pipes and fittings, which is why professional installation matters.

Will cleaning the aerator really help?

If only one tap is affected, very often yes. It takes a few minutes and costs almost nothing.

Need a hand?

Supa Nova Electrical Power & Plumbing serves homes and businesses within 20 km of Maryvale, Johannesburg. We are plumbers and electricians, so whether the problem involves water, power or a pump that needs both, one visit can solve it. We offer free quotations, with no call-out fee: you pay labour plus a R400 travelling fee. We work Monday to Friday, 7:00 to 17:00 (Saturdays by prior arrangement) and usually respond within 1 to 2 hours.

Call us on 011 485 1324 and we will get your water flowing properly again.

Leave a Comment

Your email address will not be published. Required fields are marked *