Last updated:
Many homes in Johannesburg were wired decades ago, long before we ran geysers, air conditioners, pool pumps, fibre routers, inverters and several TVs at the same time. Wiring does not fail overnight, but it does age. An outdated distribution board (DB board) or worn cabling is one of the most common hidden causes of electrical faults and house fires. Here is how to spot the warning signs and when to call an electrician.
What is a distribution board, and why does it matter?
The DB board is the box where electricity enters your home and is split into circuits for lights, plugs, the stove and the geyser. It holds the breakers and the earth leakage unit that protect you from overloads and electric shock. An old board with rewirable fuses, cracked covers or no earth leakage protection offers far less protection than a modern one.
Warning signs your wiring or DB board needs attention
- Breakers that trip often. Occasional trips happen, but a breaker that trips regularly means a circuit is overloaded or faulty. See our post on why an earth leakage keeps tripping.
- Flickering or dimming lights. This can point to loose connections or an overloaded circuit. See our post on flickering lights and when to call an electrician.
- A burning smell, or warm or discoloured plugs and switches. Switch off the circuit and stop using it. Heat means resistance, and resistance means fire risk.
- Buzzing or crackling from the DB board or sockets. These sounds are never normal.
- Rewirable fuses or a very old, rusted or cracked board. Boards of this age should be assessed.
- No earth leakage protection. Modern homes need it to guard against shock.
- Too few plug points. If you rely on multi-plugs and extension cords everywhere, your wiring was not designed for your current use. See our post on festive season electrical safety and extension cords.
- Cloth-covered, brittle or cracked cable insulation visible in the roof space or at sockets.
- Frequent appliance damage. Repeated blown electronics can point to wiring faults or surges. See our post on electrical power surges.
Why older homes struggle with modern loads
Older circuits were sized for lighter loads. Today a single kitchen can run a kettle, microwave, air fryer and dishwasher together. Add a heat pump or geyser, and the board can be pushed beyond what it was built for. If you are adding solar, an inverter or a generator, the board should be checked first. See our post on backup power, generators and inverters.
What an upgrade involves
A qualified electrician will inspect your wiring and board, test the circuits and the earth leakage protection, and advise what is needed. This might range from replacing a faulty breaker, to adding circuits for heavy appliances, to replacing the whole DB board. Work on a board must be done by a registered person, and a Certificate of Compliance is issued when the work is complete. If you plan to sell, see our post on the electrical Certificate of Compliance when selling your home. If a full rewire is on the cards, our guide to what it costs to rewire a house explains what affects the price.
What you can do now
- Test your earth leakage using the test button on the board, ideally monthly. If it does not trip, call an electrician.
- Look at the board (without opening it) for rust, cracks, scorch marks or a loose cover.
- Do not overload plugs with multi-plugs or extension cords.
- Never open the DB board or attempt wiring repairs yourself. It is dangerous and illegal without registration.
- Make a note of patterns: which breaker trips, when, and what was running.
Warning signs to call an electrician right away
- A burning smell or smoke from a socket, switch or the DB board
- Sparks, scorch marks or melted plastic
- A breaker that will not reset
- Tingling or a shock when touching an appliance or switch
- Lights that dim whenever a large appliance starts
If you smell burning, switch off at the main switch if it is safe to do so and call us.
Frequently asked questions
How old is too old for a DB board?
There is no fixed age, but boards with rewirable fuses, no earth leakage protection or visible damage should be assessed regardless of age. An electrician can advise after an inspection.
Does a new DB board fix tripping problems?
Only if the board is the cause. Often the problem is a faulty appliance or circuit, so the electrician must find the cause, not just replace the board.
Do I need a new Certificate of Compliance after board work?
Yes. Work on your installation should be certified by a registered electrician, and the certificate is also needed when selling a property.
Can I add solar or an inverter to an old board?
It is best to have the board checked first. It may need upgrading to handle the new equipment safely.
Need a hand?
Supa Nova Electrical Power & Plumbing serves homes and businesses within 20 km of Maryvale, Johannesburg. We are electricians and plumbers, so one visit can sort out the power and the water. We offer free quotations, with no call-out fee: you pay labour plus a R400 travelling fee. We work Monday to Friday, 7:00 to 17:00 (Saturdays by prior arrangement) and usually respond within 1 to 2 hours.
Call us on 011 485 1324.
