Last updated:
A light that flickers now and then is easy to ignore. But flickering can be anything from a worn-out bulb to a loose connection that is quietly overheating behind a wall. The trick is knowing which one you are dealing with. This guide walks through the common causes, what you can safely check yourself, and the signs that mean it is time to call a professional.
Start by noticing the pattern
What the lights do, and when, points to the cause.
- One bulb flickers. Almost always the bulb, the fitting or the dimmer.
- Several lights on one circuit flicker. Look for a loose connection, a faulty switch or an overloaded circuit.
- Lights dim when a big appliance starts. A kettle, geyser, aircon or pool pump pulling a heavy load can cause a brief dip. A small, short dip can be normal, but a strong or growing one is not.
- Flickering across the whole house. This suggests a problem at the main board, the supply cable or the municipal supply.
- Flickering during storms or wind. Check the supply connection and read our post on power surges.
Common causes
Loose or worn bulbs
A bulb that is not seated properly, or a worn one nearing the end of its life, is the most common cause. Switch the light off, let it cool, and refit or replace the bulb. If a new bulb still flickers in the same fitting, the problem is the fitting or the wiring.
Incompatible LED bulbs and dimmers
Many older dimmers are not designed for LED bulbs. The result is flickering, buzzing or a light that will not dim smoothly. Use LED bulbs marked as dimmable and, if the problem continues, have the dimmer replaced with one rated for LEDs.
Loose connections
Over time, the connections in light fittings, switches, plugs and distribution boards can loosen. A loose connection creates resistance, and resistance creates heat. This is the cause that matters most, because it can damage wiring and become a fire risk. Warning signs include flickering that comes and goes, a buzzing or crackling sound, warm switches or plates, and a burning smell.
Overloaded circuits
Too many appliances on one circuit can strain it. If flickering happens when you run several heavy appliances together, spread the load across different plugs and circuits. If the problem persists, the circuit may need to be upgraded or split, which is a job for a qualified electrician.
Problems at the distribution board
Worn breakers, loose neutral or live connections at the board, or an ageing board can cause lights throughout the house to flicker. If your board is old or you have had repeated tripping, see our post on earth leakage that keeps tripping.
Supply problems
Sometimes the fault is outside your house. If your neighbours also see flickering, it is likely a municipal supply issue and should be reported to your municipality or utility. If only your home is affected, the fault may be in your supply cable or at the point where it connects to your board.
What you can safely check
- Replace a flickering bulb with a new one of the correct type and wattage.
- Check that the bulb is seated firmly (with the power off).
- Note which lights flicker, and when, so you can tell your electrician.
- Unplug heavy appliances and see whether the flickering stops.
Do not open switches, fittings or the distribution board yourself. Electrical work should only be done by a qualified electrician, and live wiring can kill.
When to call an electrician
Call a professional straight away if:
- Flickering comes with a burning smell, buzzing, sparks or scorch marks
- Switches, plugs or the board feel warm to the touch
- The whole house flickers, or the flickering is getting worse
- Breakers trip repeatedly alongside the flickering
- Your wiring is old and has never been inspected
If you ever smell burning or see sparks, switch off at the main and call us immediately.
Frequently asked questions
Is a little flickering when the fridge or geyser switches on normal?
A very brief, slight dip can happen when a large appliance starts. If it is strong, frequent or getting worse, have it checked.
Can flickering lights damage my appliances?
Yes. Voltage problems and loose connections can shorten the life of sensitive electronics. A surge protector helps, but fixing the cause is better.
Why do my new LED lights flicker when the old bulbs never did?
LEDs are more sensitive to dimmers and to small voltage variations. Compatible bulbs and dimmers usually solve it.
Does flickering affect my electrical certificate of compliance?
Faults such as loose connections or an unsafe board may need to be corrected before a certificate can be issued. See our post on the certificate of compliance when selling your home.
Need a hand?
Supa Nova Electrical Power & Plumbing serves homes and businesses within 20 km of Maryvale, Johannesburg. We are electricians and plumbers, so one visit can sort out whatever is behind the problem. We offer free quotations, with no call-out fee: you pay labour plus a R400 travelling fee. We work Monday to Friday, 7:00 to 17:00 (Saturdays by prior arrangement) and usually respond within 1 to 2 hours.
Call us on 011 485 1324 and we will track down the cause and put it right.
